{"id":227,"date":"2024-08-19T18:59:45","date_gmt":"2024-08-19T22:59:45","guid":{"rendered":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/?p=227"},"modified":"2024-10-11T09:04:04","modified_gmt":"2024-10-11T13:04:04","slug":"bambu-labs-p1s-filament-chart","status":"publish","type":"post","link":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/?p=227","title":{"rendered":"Bambu Labs P1S Filament Chart"},"content":{"rendered":"\n

(taken from https:\/\/wiki.bambulab.com\/en\/general\/filament-guide-material-table<\/a> and modified slightly)<\/p>\n\n\n\n

Material<\/strong><\/th>Enclosed printer
\uff08X1C, X1, X1E, P1S, enclosed P1P, etc.\uff09<\/strong><\/th>		0.2 mm Nozzle<\/strong><\/th>0.4 mm Nozzle\u00a0<\/strong><\/th>0.6 mm Nozzle<\/strong><\/th>0.8 mm Nozzle\u00a0<\/strong><\/th>Hardened Steel Nozzle Required?<\/strong> *<\/th>Nozzle Temperature
(\u00b1 10 \u00b0C)<\/strong><\/th>		Compatible with AMS \/ AMS lite? **<\/strong><\/th><\/tr><\/thead>
PLA*<\/strong>**<\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>190 – 240<\/td>YES<\/td><\/tr>
Wood \/ Rock \/ Metal-filled PLA<\/strong><\/td>YES<\/td>NO<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>YES for Metal-filled PLA<\/td>190 – 240<\/td>YES  when not very brittle, rough or soft<\/td><\/tr>
PLA-CF\/GF<\/strong><\/td>YES<\/td>NO<\/strong><\/td>Recommended for Bambu PLA-CF<\/strong><\/td>YES<\/td>YES<\/td>YES<\/strong><\/td>210 – 240<\/td>YES for Bambu PLA-CF<\/td><\/tr>
PLA Glow \/ Glow-in -the-dark<\/strong><\/td>YES<\/td>NO<\/strong><\/td>Recommended<\/strong><\/td>YES<\/td>YES<\/td>Recommended for long-term printing<\/strong><\/td>210 – 240<\/td>YES for AMS, not recommended for AMS lite<\/strong><\/td><\/tr>
PVA, BVOH
Dry State<\/strong><\/td>		YES<\/td>YES 
\uff08Dry State\uff09<\/td>		YES<\/td>YES<\/td>YES<\/td>NO<\/td>190 – 240<\/td>YES 
\uff08Dry State\uff09<\/td><\/tr>
Support W, Support for PLA, Support for PLA\/PETG<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>190 – 240<\/td>YES<\/td><\/tr>
PETG<\/strong><\/td>YES
Recommended<\/td>		YES<\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>240 – 270<\/td>YES<\/td><\/tr>
PETG-CF<\/strong><\/td>YES
Recommended<\/td>		NO<\/strong><\/td>Recommended for Bambu PETG-CF<\/strong><\/td>YES<\/td>YES<\/td>YES<\/strong><\/td>240 – 270<\/td>YES for AMS, not recommended for AMS lite<\/strong><\/td><\/tr>
TPU<\/strong><\/td>YES<\/td>Not recommended<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>200 – 250<\/td>NO<\/strong><\/td><\/tr>
ABS<\/strong><\/td> Recommended<\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>240 – 280<\/td>YES<\/td><\/tr>
ABS-GF<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/strong><\/td>240 – 280<\/td>YES<\/td><\/tr>
ASA<\/strong><\/td> Recommended<\/td>YES<\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>240 – 280<\/td>YES<\/td><\/tr>
PC<\/strong><\/td> Recommended<\/td>Not recommended<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>260 – 290<\/td>YES<\/td><\/tr>
PA<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>260 – 290<\/td>YES<\/td><\/tr>
Support for PA\/PET<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>Highly recommended<\/strong><\/td>YES<\/td>YES<\/strong><\/td>260 – 300<\/td>YES for Bambu PA-CF, PAHT-CF<\/td><\/tr>
PA-CF\/GF
PA6-CF\/GF
PAHT-CF\/GF<\/strong><\/td>		 Recommended<\/td>NO<\/strong><\/td>YES<\/td>Highly recommended<\/strong><\/td>YES<\/td>YES<\/strong><\/td>260 – 300<\/td>YES for Bambu PA-CF, PAHT-CF<\/td><\/tr>
PET-CF\/GF<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>Highly recommended<\/strong><\/td>YES<\/td>YES<\/strong><\/td>260 – 300<\/td>NO<\/strong><\/td><\/tr>
PPA-CF\/GF<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>Highly recommended<\/strong><\/td>YES<\/td>YES<\/strong><\/td>285 – 320<\/td>NO<\/strong><\/td><\/tr>
PPS<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>YES<\/td>YES<\/td>NO<\/td>285 – 330<\/td>YES<\/td><\/tr>
PPS-CF\/GF<\/strong><\/td> Recommended<\/td>NO<\/strong><\/td>YES<\/td>Highly recommended<\/strong><\/td>YES<\/td>YES<\/strong><\/td>310 – 350<\/td><\/td><\/tr><\/tbody><\/table>
* (Common nozzle materials include hardened steel, stainless steel and brass)<\/strong><\/figcaption><\/figure>\n\n\n\n

** Please note that it only explains the filament compatibility with AMS \/ AMS lite from the perspective of filament loading and unloading. In actual use, the compatibility between the printers and the filaments must also be considered.<\/mark><\/p>\n\n\n\n

***The PLA here refers to normal PLA, that is, PLA that does not contain carbon fiber (CF), glass fiber (GF) or other metal, inorganic non-metal fillers with high hardness and big particle size,\u00a0, including PLA Basic, PLA Matte , PLA Tough, PLA Metal, PLA Silk, PLA Aero, PLA Dynamic, etc., excluding PLA-CF, PLA-GF, PLA Sparkle, PLA Marble, etc.<\/mark><\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

(taken from https:\/\/wiki.bambulab.com\/en\/general\/filament-guide-material-table and modified slightly) Material Enclosed printer\uff08X1C, X1, X1E, P1S, enclosed P1P, etc.\uff09 0.2 mm Nozzle 0.4 mm Nozzle\u00a0 0.6 mm Nozzle 0.8 mm Nozzle\u00a0 Hardened Steel Nozzle Required? * Nozzle Temperature(\u00b1 10 \u00b0C) Compatible with AMS \/ AMS lite? ** PLA*** YES YES YES YES YES NO 190 – 240 YES Wood […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[12],"tags":[],"class_list":["post-227","post","type-post","status-publish","format-standard","hentry","category-user-management"],"_links":{"self":[{"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/227","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=227"}],"version-history":[{"count":3,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/227\/revisions"}],"predecessor-version":[{"id":231,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=\/wp\/v2\/posts\/227\/revisions\/231"}],"wp:attachment":[{"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=227"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=227"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/triosdevelopers.com\/J.Smith\/rjeffsmith.ca\/wordpress\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=227"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}